
madCAM 3Xtra @ USD $1895 +GST
For local currency |
||||
![]() |
AUD | $2860.81 + 10% GST = | ||
![]() |
NZD | $3,095.39 + 15% GST = |
madCAM provides the ability to generate 3, 4 and 5-axis toolpaths in Rhinoceros®. Rhino and madCAM also work superbly together as a CAM system, even when work is normally undertaken in another CAD system, because Rhino is extremely capable of importing files in other 3D formats.
Click on a gallery image below to expand in separate window: | ||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Compare product features below and see how different versions of madCAM can benefit you:
2 1/2 axis Milling |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Profiling |
X | X | X | X | X | X |
Pocketing |
X | X | X | X | X | X |
Facing |
X | X | X | X | X | X |
Drilling |
X | X | X | X | X | X |
Engraving |
X | X | X | X | X | X |
V-carving |
X | X | X | X | X |
3 axis Milling |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Z-level Pocketing |
X | X | X | X | X | X |
Z-level Facing |
X | X | X | X | X | X |
Parallel Roughing |
X | X | X | X | X | X |
Z-level finishing (Water line finishing) |
X | X | X | X | X | X |
Planar finishing |
X | X | X | X | X | X |
Planar contour finishing |
X | X | X | X | X | |
Pencil Tracing |
X | X | X | X | X | X |
Surface angle limit control (Steep or flat surface machining) |
X | X | X | X | X | X |
Along Curves (Engraving) |
X | X | X | X | X | X |
Project curves (Engraving) |
X | X | X | X | X | X |
Between two curves |
X | X | X | X | X | X |
From boundary curves |
X | X | X | X | X | X |
Roughing from 3D Stock Model |
X | X | X | X | X | |
Re-roughing |
X | X | X | X | ||
Z-level remachining |
X | X | X | X | ||
Planar remachining |
X | X | X | X | ||
Contour remachining |
X | X | X | X | ||
V-carving |
X | X | X | X |
4 axis Milling |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Indexed 3 + 1-axis |
X | X | X | X | ||
Simultaneous 4-axis Profiling |
X | X | X | X | ||
Simultaneous 4-axis Pocketing |
X | X | X | X | ||
Simultaneous 4-axis Facing |
X | X | X | X | ||
Simultaneous 4-axis Radial-level Pocketing |
X | X | X | X | ||
Simultaneous 4-axis Radial-level Facing |
X | X | X | X | ||
Simultaneous 4-axis Parallel Roughing |
X | X | X | X | ||
Simultaneous 4-axis Radial-level finishing |
X | X | X | X | ||
Simultaneous 4-axis Planar finishing |
X | X | X | X | ||
Simultaneous 4-axis Planar contour finishing |
X | X | X | X | ||
Simultaneous 4-axis Spiral finishing |
X | X | X | X | ||
Simultaneous 4-axis Pencil Tracing |
X | X | X | X | ||
Surface angle limit control (Steep or flat surface machining) |
X | X | X | X | ||
Simultaneous 4-axis Along Curves (Engraving) |
X | X | X | X | ||
Simultaneous 4-axis Project curves (Engraving) |
X | X | X | X | ||
Simultaneous 4-axis Between two curves |
X | X | X | X | ||
Simultaneous 4-axis From boundary curves |
X | X | X | X | ||
Simultaneous 4-axis Roughing from 3D Stock Model |
X | X | X | X | ||
Simultaneous 4-axis Radial-level remachining |
X | X | X | |||
Simultaneous 4-axis Planar remachining |
X | X | X | |||
Simultaneous 4-axis Contour remachining |
X | X | X | |||
Simultaneous 4-axis V-carving |
X | X | X |
5 axis Milling |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Indexed 3 + 2 axis |
X | X | ||||
Simultaneous 5 axis from axis of revolution |
X | X | ||||
Simultaneous 5-axis Drive Surface Offset-level Pocketing |
X | |||||
Simultaneous 5-axis Drive Surface Offset-level Facing |
X | |||||
Simultaneous 5-axis Drive Surface U-V Roughing |
X | |||||
Simultaneous 5-axis Drive Surface Offset-level finishing |
X | |||||
Simultaneous 5-axis Drive Surface U-V finishing |
X | |||||
Simultaneous 5-axis Drive Surface border contour finishing |
X | |||||
Simultaneous 5-axis Closed Drive Surface spiral finishing |
X | |||||
Simultaneous 5-axis Drive Surface Pencil Tracing |
X | |||||
Simultaneous 5-axis Drive Surface angle limit control |
X | |||||
Simultaneous 5-axis SWARF Profiling from surface edge curves |
X | |||||
Simultaneous 5-axis Profiling perpendicular to surface |
X | |||||
Simultaneous 5-axis Part trimming from curves and vectors |
X |
Regions and Boundaries |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Box work piece |
X | X | X | X | X | X |
Region Curves |
X | X | X | X | X | X |
Tool path Clipping planes |
X | X | X | X | X | X |
User defined 3D stock models |
X | X | X | X | X | |
Drive Surface calculation height and depth option |
X | |||||
Regions from drive surface borders (trim curves) |
X | |||||
Drive Surface tool path clipping levels option. |
X | |||||
Simultaneous 5-axis vertical angle limit option |
X |
Toolpath editing |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Transform and copy as ordinary Rhino curves |
X | X | X | X | X | X |
Simulation |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
3-axis Material removal simulation |
X | X | X | X | X | X |
4-axis or 5-axis Material removal simulation |
X | X | X | X | ||
Tool holder collision detection and simulation |
X | X | X | X | X | X |
4 axis machine parts simulation |
X | X | X | X | ||
5-axis machine parts simulation |
X | X |
Custom machine |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
4-axis machine setup |
X | X | X | X | ||
5-axis machine setup |
X | X | ||||
Custom STL files support for machine parts simulation |
X | X | X | X | X | |
External DLL support for machine kinematics |
X |
Post Processor |
3X | 3Xtra | 4X | 4Xtra | 5X | 5Xtra |
Customizable post processors |
X | X | X | X | X | X |
4-axis output |
X | X | X | X | ||
5-axis output |
X | X | ||||
5-axis APT output |
X | X | ||||
Support for Inverse time feed (G93) |
X | X | X | X |