Discover Rhino 6

Grasshopper

Opens the Grasshopper plug-in window.

GrasshopperPluginList

Shows the plug-ins used in the currently loaded Grasshopper file.

Isolate

Hides all objects except the selected objects.

Right-click: Unisolate — restores objects previously hidden by Isolate (RMB)

IsolateLock

Locks all objects except the selected objects.

Right-click: UnisolateLock — unlocks objects previously locked by IsolateLock (RMB)

SelPicture

Selects all objects created with the Picture command.

SelPlanarSrf

Selects all planar surfaces.

SelKey

Selects objects by their user text key.

SelValue

Selects objects by their user text value.

SelKeyValue

Selects objects by their user text key and value.

SelPlanarCrv

Selects all planar curves.

SelControlPointRegion

Selects a range of control points on a curve or surface.

Right-click: ShowDirOff — closes the object orientation display (RMB)

SelVolumeObject

Selects objects enclosed by a closed extrusion, surface, polysurface, or mesh.

ExtractSubCrv

Selects and separates or duplicates a polycurve segment.

InfinitePlane

Uses an infinite plane as a cutting object in supported commands.

SelFence

Selects objects using a crossing sketched polyline.

DragStrength

Sets global object-drag strength as a percentage of mouse movement.

Parabola3Pt

Draws a parabolic curve through three picked points.

Catenary

Creates the curve formed by a hanging chain or cable supported at its ends.

AddGuide

Adds temporary infinite construction guides.

Right-click: RemoveGuide — removes a guide line (RMB)

Distribute

Distributes objects evenly between the end objects.

OneView

Supports single-viewport modeling by aligning the construction plane to the current view.

ShowEnds

Displays curve endpoints and opens the End Analysis control.

Right-click: ShowEndsOff — turns off the curve-end display (RMB)

ChangeSpace

Moves or copies objects between layout and detail space.

SystemInfo

Reports information about the computer hardware, operating system, and Rhino installation.

MoveExtractedIsocurve

Moves a history-enabled curve created by ExtractIsocurve on its source surface.

OffsetMultiple

Creates multiple parallel copies of curves or surface edges.

SelControlPoint

Selects all control points.

RemoveAllNakedMicroEdges

Removes very small single naked edges that fold or loop back on themselves.

GumballAutoReset

Resets the gumball alignment after each use.

CopyHole

Copies holes in a planar surface.

ShowDir

Displays object direction and opens the Direction Analysis control.

Right-click: ShowDirOff — closes the object direction display (RMB)

FilletEdge

Creates and edits tangent fillet surfaces between polysurface edges.

Notifications

Toggles the Notifications panel.

AddNgonsToMesh

Converts regions of connected coplanar welded mesh faces into n-gons.

DeleteMeshNgons

Converts mesh n-gons into triangle or quad faces.

Shell

Applies thickness by offsetting the remaining faces of a polysurface to create a solid.

DevLoft

Creates a single developable loft surface between two rail curves.

MeshFromLines

Creates a mesh from three or more intersecting lines.

Raytraced

Sets the viewport to Raytraced display mode.